Promise Technology SUPERTRAK EX8300 Guia De Inicio Rapido página 8

SuperTrak EX8300, EX8350 Quick Start Guide
4. Optional. Attach cables from the LED pins on the SuperTrak card (see
above) to the activity LEDs in your enclosure.
The Promise SuperSwap enclosure has its own internal LED connections.
SuperSwap does not use the individual LED connectors shown above. Be
sure you connect the Serial ATA data cables in order. See the SuperSwap
User Manual for additional information.
Step 4: Create a Logical Drive
You will now use the onboard SuperBuild BIOS utility to create a logical drive with
the attached drives. Even if you plan to use the WebPAM software to manage
your logical drive, you can still create your first logical drive using the SuperBuild
Utility, as described here.
For an explanation of the logical drive concepts, see Chapter 6 of the SuperTrak
EX8300, EX8350 User Manual on the CD.
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
– +
8