Electrolux CE6010GR Manual De Uso página 5

CHARACTERISTICS - INSTALLATION
FIXING OF THE HOOD UNDER THE CABINET
• To drill the cabinet follow the indications given in the dimen-
sional drawing in the chapter which regards hood dimensions.
• To fix the hood onto the cabinet use the 44,4 mm long screws
inserting and tightening them from the inside of the cabinet.
AIR OUTLET IN THE DUCTING MODE
When installing the hood in ducting version, basing on the in-
staller's choice, a rigid or a flexible pipe is used in order to con-
nect the hood to the air outlet piping.
• Insert the flange on the hood body outlet.
• Open the metal grid and make sure that the conversion knob is
in the ducting position.
• Connect the hood to the air outlet piping with a pipe.
• Fix the pipe with an adequate quantity of pipe clamps. This
material is not supplied together with the hood.
• Remove the charcoal filter if present.
EN
Connection to air outlet
5 5