Controller Modes - Chauvet DJ Obey 6 Guía De Referencia Rápida

Obey™ 6 QRG
Controller
Modes
Preset Colors
Auto
Chases
Color Fade
Color Macro
Sound
Momentary/
Quick Colors
Strobe
Blackout
Manual
RGBAW+UV
The Obey™ 6 has the following operating modes. For detailed instructions
on how to use these modes, and how each mode interacts with other
modes, read the user manual available from www.chauvetlighting.com.
The 18 preset color buttons assign a color to each addressed fixture or
fixture group.
This mode uses built-in programs to change each fixture independently
among random colors.
These preset chases offer several color combinations that cycle the
LEDs on and off so that the lights appear to move along a string.
This built-in color fade program creates a serial chase through fixtures
1–6.
These preset color macros have varying intensities.
This feature creates a sound-activated show using the Color Fade,
Auto, and Chase modes.
An all-red, all-green, all-blue, all-amber, all-white or all-UV operating
mode can create a stable wash or spot for varying lighting needs.
When in Preset mode, these are single-color buttons.
This mode produces flashes of light at regular intervals. These
intervals are set by moving the strobe speed fader.
Darkens all fixtures.
Set this mode to use a manually selected custom color combination
determined by the positions of the red, green, blue, amber, white, and
UV faders.
To operate any of the modes that offer amber, white, or UV color
options, the selected fixture must be capable of outputting that
corresponding color light.
5
EN