Rev-A-Shelf 5PD-24FOG Instrucciones De Instalación página 3

STEP 3
Attach the two wire baskets
to the side frames using (8)
M4 x 6 mm pan head machine
screws (Figure 3).
Attach the handle to the side
frames using (2) M5 x 12 mm
pan head machine screws as
shown in (Figure 4).
Note: Screws may already
be attached to brackets
and handle.
#2
STEP 4
Mount this assembly to the
base brackets and use (4)
M4 x 6 mm pan head screws
to secure the unit to the
brackets (Figure 5).
Attach the two cover plates
to the side frames to cover
the screws installed in Fig 5.
#2
Assembly
FIG.
3
FIG.
5
INSTALLATION INSTRUCTIONS: 5PD SERIES PULL DOWN
FIG.
4
3