Before Using The Appliance For The First Time; Brewing Coffee Now - Proline RETROC Manual De Instrucciones

EN

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Carefully unpack the appliance and remove all packaging materials.
Wipe the appliance with a slightly damp cloth. Dry thoroughly.
It is recommended to wash the drip coffee system before first use.
Fill the water tank with cold water and follow the directions for brewing coffee to make
at least two carafes of coffee without using ground coffee.
Switch off the coffee maker and allow it to cool before refilling with cold water.

BREWING COFFEE NOW

1. Place the appliance on dry, level and heat-resistant surface, away from any edge.
2. Open the top cover.
3. Fill the water tank with the required amount of fresh, cold water using the water
level indicator as a guide.
• The markings on the water tank window indicate level of water required to brew
the desired number of cups.
• To avoid overflow, do not fill the water tank with water past the max line.
4. Place the mesh filter into the filter holder, making sure it is assembled correctly.
5. Place a 1x4 paper filter (not supplied) into the mesh filter.
6. Add the desired ground coffee in the paper filter by spreading it evenly.
• It is recommended to use a level spoon of ground coffee (approximately 6g) for
every cup of coffee.
7. Close the top cover until a click is heard.
8. Slide the carafe into the appliance ensuring it sits correctly on the plate.
9. Plug the coffee maker into the mains socket.
10. Press the power on/off button to turn on the coffee maker.
• The indicator light will illuminate, indicating that the appliance is brewing coffee.
11. The coffee will begin to flow from the filter holder after a short time.
• During brewing, you can remove the carafe from the warming plate. The brewing
process does not stop during this period and only the flow of coffee from the
filter holder stops. Do not remove the carafe for longer than 30 seconds or the
coffee may overflow the filter holder.
• Although the coffee maker has the above feature, it is not recommended to pour
coffee before the cycle has completed as do this may affect the flavour of the
coffee.
• It is normal for the appliance to emit steam while it is brewing coffee.
• The brewing process can be interrupted at any time by pressing the power on/off
button. The red indicator light will go out.
12. When the brewing process is finished, allow coffee to stop dripping and then
remove the carafe to serve.
13. To keep coffee warm after the brewing process has finished, place the carafe on the
warming plate.
• The appliance is designed to keep the coffee warm for approximately 40 minutes
and then the appliance will be turned off automatically.
14. To turn off the coffee maker, press the power on/off button.
• The indicator light will go out.
EN-4