Axis Q6055-C Guia De Instalacion página 12

AXIS Q6055-C PTZ Dome Network Camera
6. To install an SD card, see How to install an SD card (optional) on page 12.
7. To attach the dome cover to the top cover, align the bulge on the dome cover with the
cooling system on the camera unit and tighten the screws (torque 1.5 Nm).
1
Dome cover
2 Top cover
3
Cooling system
How to install an SD card (optional)
Installing an SD card is optional. A standard or high capacity SD card (not included) can be used to
store recordings locally in the product.
1. Loosen the dome ring screws and remove the dome cover.
2. Insert an SD card into the SD card slot.
3. To attach the dome cover to the top cover, align the bulge on the dome cover with the
heater on the camera unit and tighten the screws (torque 1.5 Nm).
12