Publicidad
Idiomas disponibles
Idiomas disponibles
RFT-1081
RFT-1101
E
NCLOSURE
• Roto-Mold Construction
produces a composite enclosure with seamless construction. This greatly
increases rigidity to prevent the enclosure from flexing and allows custom
designs to be fabricated. The result is a radical, stronger, more reliable
enclosure.
• Acoustic Suspension Enclosure
acoustic suspension design (sealed) for optimum performance. The
enclosure is matched to the woofer for deep bass output while requiring
minimal operating space.
• Anti-Tip Design
– The enclosure has a flat bottom to provide a solid
foundation for securing it to the vehicle and prevent it from rolling.
RFT-1081
Frequency Response .............................................. 30Hz-400Hz
3
Enclosure Vb (ft
/ liter) .......................................... 0.35 (9.91L)
Baffle Thickness ............................................................. 0.300"
Speaker Model .......................................................... RFP-1408
Nominal Impedance ............................................................. 4Ω
Fs ................................................................................... 30Hz
RE .................................................................................. 3.6Ω
LE ................................................................................ 2.5mH
QMS ................................................................................ 4.89
QES ................................................................................ 0.32
QTS ................................................................................. 0.30
VAS (ft
3
/ liter) ........................................................... 0.883/25L
XMAX (in/mm) ........................................................ 0.32"/8mm
SPL (dB @ 1w/1m) .......................................................... 85dB
Power Handling (RMS/Peak) ................................. 200W/400W
3
Speaker Displacement (ft
/ liter) .............................. 0.05/1.416L
Overall Dimensions ........................... 9
Weight ........................................................ 13.5 lbs. (6.12kg)
(2) Nylon Straps
®
8" Box That Rocks
10" Box That Rocks
RFT-1081
– The use of Roto-Mold manufacturing
– The Subz enclosure uses an
S
PECIFICATIONS
9
⁄
"H x 10
3
⁄
"W x 12
16
16
(24.29cm x 25.87cm x 31.59cm)
A
CCESSORY
®
F
EATURES
P
W
UNCH
OOFER
• PVA Cone
– The cone material used is a spruce pulp paper and provides
the necessary combination of weight and strength to allow high levels of
output without cone break up. The cone is also treated with a water
resistant PolyVinyl Acetate (PVA) emulsion which increases cone rigidity
and lowers distortion.
• Aluminum Voice Coil Former
layers of copper wound on a black, anodized, aluminum former. This
improves the speaker's power handling by efficiently dissipating heat from
the voice coil.
• Hyper-Extended Pole Piece
provide a more linear magnetic field for the operation of the woofer. This
lowers distortion and provides the woofer with better low frequency
response.
• Vented Bumped Back Plate
deeper to allow the woofer more excursion for harder hitting bass.
Additionally, the back plate is vented with a radiused aerodynamic vent that
efficiently and quietly keeps the voice coil cool.
RFT-1101
Frequency Response .............................................. 24Hz-400Hz
3
Enclosure Vb (ft
Baffle Thickness ............................................................. 0.300"
Speaker Model .......................................................... RFP-1410
Nominal Impedance ............................................................. 4Ω
Fs ................................................................................... 24Hz
RE .................................................................................. 3.6Ω
LE ................................................................................ 2.5mH
QMS................................................................................ 4.08
QES ................................................................................ 0.27
QTS ................................................................................. 0.25
3
VAS (ft
/ liter) ............................................................. 2.72/77L
XMAX (in/mm) ........................................................ 0.32"/8mm
SPL (dB @ 1w/1m) .......................................................... 87dB
Power Handling (RMS/Peak) ................................. 200W/400W
Speaker Displacement (ft
7
⁄
"L
Overall Dimensions ............................ 11
16
Weight ........................................................ 17.8 lbs. (8.07kg)
P
ACK
(4) Plastic Mounting Brackets
Specifications subject to change without notice
– 1 –
RFT-1101
– The voice coil is made of multiple
– The pole piece has been extended to
– The back plate has been stepped
/ liter) ....................................... 0.81 (22.94L)
3
/ liter) .............................. 0.06/1.699L
7
⁄
"H x 12
8
(30.16cm x 32.07cm x 39.69cm)
(8) Mounting Screws
Specification
Reference
Sheet
5
5
⁄
"W x 15
⁄
"L
8
8
Publicidad
