- To remove the rechargeable battery, you
1 To deplete the rechargeable battery of any
2 Remove and discard the brush head. Cover
3 Hold the top of the handle with one hand
1
2
4 Remove the end cap from the toothbrush
need a towel or cloth, a hammer and a flat-
head (standard) screwdriver. Observe basic
safety precautions when you follow the
procedure outlined below. Be sure to
protect your eyes, hands, fingers, and the
surface on which you work.
charge, remove the handle from the
charger, turn on the toothbrush and let it
run until it stops. Repeat this step until you
can no longer turn on the toothbrush.
the entire handle with a towel or cloth.
and strike the handle housing 0.5 inch
above the bottom end. Strike firmly with a
hammer on all 4 sides to eject the end cap.
Note: You may have to hit on the end
several times to break the internal snap
connections.
handle. If the end cap does not release
easily from the housing, repeat step 3 until
the end cap is released.
23
English