(6562 ft)
•
• NEMA 250
EN/IEC 60529 (
The following information applies when operating this equipment in hazardous
locations:
Products marked "CL I, DIV 2, GP A, B, C, D" are suitable for use in Class I Division 2 Groups A, B, C, D,
Hazardous Locations and nonhazardous locations only. Each product is supplied with markings on
the rating nameplate indicating the hazardous location temperature code. When combining
products within a system, the most adverse temperature code (lowest "T" number) may be used to
help determine the overall temperature code of the system. Combinations of equipment in your
system are subject to investigation by the local Authority Having Jurisdiction at the time of
installation.
WARNING
EXPLOSION HAZARD
• Do not disconnect equipment unless power has been removed or the area is
known to be nonhazardous.
• Do not disconnect connections to this equipment unless power has been
removed or the area is known to be nonhazardous. Secure any external
connections that mate to this equipment by using screws, sliding latches,
threaded connectors, or other means provided with this product.
• Substitution of components may impair suitability for Class I, Division 2.
• If this product contains batteries, they must be changed only in an area
known to be nonhazardous.
II 3 G
•
2014/34/EU
II
http://www.rockwellautomation.com/products/certification
•
EN 60079-15
• 5069-AEN2TR EtherNet/IP
• 5069-AEN2TR EtherNet/IP
•
IEC
IECEx
•
•
IEC 60079-15
• 5069-AEN2TR EtherNet/IP
• 5069-AEN2TR EtherNet/IP
2
1770-4.1
)
II
3
EC
"Ex nA IIC T4 Gc"
125V AC
EN 60079-0:2012+A11:2013 EN 60079-16:2010
ATEX
1999/92/EC
2
IEC 60079-0
2
"Ex nA IIC T4 Gc"
IEC 60079-0
6
IEC-60079-15L
IEC 60079-0
6
IEC-60079-15
II
(
IEC 60664-1
"CL I DIV 2 GP A B C D"
C D
(
"T"
)
-
•
•
•
•
EN 60079-0:2012+A11:2013 EN 60079-15:2010
DEMKO 16 ATEX 1758X
4
(
125V AC
)
4
IECEx
IECEx UL 16.0124X
5069-IN003C-ZC-P - 2016
12
5069 Compact I/O EtherNet/IP
)
2000 m
5VA
I 2
A B
I
2
DEMKO 15 ATEX 1455X
IECEx UL 15.0007X
3