Cisco Linksys PLE300 Guía De Instalación Rápida página 6

English : Installation
B.
Connect the other end of the
cable to the computer or other
device that you want to add to the
network .
C.
Connect the power cord to the
Power port .
D.
Plug the other end into an electrical
outlet .
NOTE:
home, Linksys recommends that you plug the Adapter directly into an
electrical outlet . The Adapter has its own power filter to help protect
against surges .
E.
The Power, Ethernet, and Powerline
LEDs light up .
NOTE:
LED
the connection between
the Adapter and your
powerline network has
been established .
4
Because the Adapter sends data over the power lines of your
The Powerline
indicates that
Hardware installation is complete.
Connect Other End of Network Cable
Connect Power Cord
Plug Power into Outlet
Power, Ethernet, and Powerline LEDs
Light Up
Powerline AV Network Adapter
PLE300