Promise Technology VTRAK E-Class E830f Guia De Inicio Rapido página 34

VTrak E-Class Quick Start Guide
The choices are WriteThru (write through) and WriteBack. Write back
requires a Read Cache or Read Ahead Read Cache Policy.
2. Click the Add button to continue.
The logical drive you just created appears in the New Logical Drives list.
3. Click the Next button to continue.
The Create Spare Drive screen appears.
Step 3 – Spare Drive Creation
Creating a spare drive is optional but highly recommended.
1. Enter your information and choose your options.
• Check the Revertible box if you want this spare drive to be revertible.
For more information see the VTrak E-Class Product Manual.
• Choose the option for the type spare drive you want.
Global – Replaces a failed drive in any disk array.
Dedicated – Replaces the failed drive only in the assigned disk array.
2. Mouse-over the enclosure graphic to view information about physical drives.
3. Click a physical drive to select it for your spare drive.
The physical drive's ID number is added to the Selected list.
4. Click the Next button to continue.
The Summary screen appears.
Step 4 – Summary
The Summary screen lists the disk arrays, logical drives, and spare drives that
you specified.
If you accept these parameters, click the Submit button.
If you do NOT accept these parameters, review and modify your selections in the
previous steps.
Logging out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout at the top right corner of the WebPAM PROe screen.
Figure 20.Clicking "Logout" on the WebPAM PROe screen
Clicking Logout brings you back to the Login Screen. See page 30.
34