PRODUCT OVERVIEW & OPERATIONS
PRODUCT OVERVIEW & OPERATIONS
e-ion fi lters
Front panel
Receiver
Horizontal airfl ow
direction louver
• Manually
adjustable.
Vertical airfl ow
direction louver
• Do not adjust
by hand.
Remote control
display
4
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
e-ion charging wire
Active e-ion Generator
Maximum
distances: 8m
Auto OFF/ON button
• Used when remote control is misplaced
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control
display to prevent the unit from starting/stopping improperly.
TO SET TEMPERATURE
• For heat, cool and dry modes, the range of temperature for
selection is 16°C ~ 30°C.
• Operating the unit within the recommended temperature could
induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the standard
setting temperature.
• To change the standard setting temperature, press
or
for "LO".
Room
Operation
temperature
mode
23°C & above
Cool
Below 23°C
Dry
Below 20°C
Heat
HEAT mode - To enjoy warm air
• In heat mode, it takes a while for the unit to warm up. The power
indicator blinks during this operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
or malfunction.
Action
Press once.
Press and hold until 1 beep is
heard, then release.
Press the button to turn off.
INDICATOR
(Red/Orange/Blue)
(Green)
(Orange)
(Orange)
(Orange)
(Blue)
Standard setting
temperature
(+2°C)
25°C
27°C
22°C
24°C
21°C
23°C
Mode
Auto
Cooling
POWER
for "HI"
HI
LO
(-2°C)
23°C
20°C
19°C