Using The Appliance; Switching The Appliance On And Off; Trimming With Comb - Philips 1000 Serie Manual De Instrucciones

10
English

Using the appliance

Switching the appliance on and off

Trimming with comb

Always check the appliance and all accessories
before use. Do not use the appliance or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one of
the original type.
Note: This appliance is for cordless use only.
Always comb the beard and/or moustache with a
fine comb before you start trimming.
Be careful when you trim for the first time.
Do not move the trimmer too fast. Make
smooth and gentle movements.
1 To switch on the appliance, slide the on/off
button up.
2 To switch off the appliance, slide the on/off
button down.
The length settings on the Precision Zoom Lock™
adjustment ring (ranging from 1 to 10) correspond
to the remaining hair length after trimming. For
example, setting 2 equals a hair length of 2mm.
Note: When you trim for the first time, start at the
highest length setting to familiarise yourself with
the appliance.