Philips 1000 Serie Manual De Instrucciones página 13

Replacement
3 Remove the comb and clean it with the
cleaning brush.
4 Remove the cutting unit by pushing against the
teeth of the cutting unit and clean it with the
brush or rinse it under the tap.
Only the cutting unit can be rinsed under the
tap
5 Carefully shake off excess water and let air dry
completely.
6 Insert the lug of the cutting unit into the guiding
slot and push the cutting unit back onto the
appliance.
Replace damaged parts immediately. Always
replace the cutting unit with the original Philips
cutting unit.
13
English