Cleaning And Care - AEG KAM400 Manual De Instrucciones

19
Press the pre-ground coffee powder button
Grinder closed will show up on the display.
20
Press the ON/OFF button. Brewing will start at once and the keep warm function
21
How to prepare coffee using the coffee grinder with pre-programming of the start (Auto function). Long press the
Program button
22
Set the desired number of cups
can be set.
23
Set the coffee strength by pressing the Strength coffee button. The symbols of coffee strength is indicated on the display:
mild, medium, strong.
24
Set Aroma setting at 2 or 4 cups. Press the Aroma button.
25
After finishing program setup, short press Program button
buttons will not response if pressed. If once pre-programmed, the start time, number of cups and coffee strength are not to be
changed. Press the Program button to activate the Auto function.
26
When reached the pre-set time, the machine will start brewing coffee and the keep warm function.
27
If the appliance is pre-programmed using the Auto function, but the coffee is requested before the start time. Switch off
the Auto function by pressing the Program button.
Note: When preparing coffee with beans: Coffee preparation takes place with the settings in normal mode. When the settings
differ from the Auto function, it is needed to change the settings accordingly in the normal mode prior to the start.
28
Deactivating the Auto function.
If the Auto function is activated but the program is not intended to start, press the Program button.
29
Switching off. Press the ON/OFF button.
Warming plate. After brewing, the warming plate keeps the coffee in the glass jug warm. Two hours after brewing, the appli-
ance will go into standby mode automatically.
Removing the jug. When the jug is removed, the anti-drip valve prevents dripping.

CLEANING AND CARE

30
The filter insert can be removed for emptying and cleaning. Swing out the swivel filter. Place a finger in the rear handle recess
and pull the bracket up. This unlocks the filter insert and it can be removed for cleaning. Activate the anti-drip valve several times
during cleaning.
31
After cleaning the filter insert, fit the swivel filter. Reposition the bracket. The filter insert is now relocked. Please check that it
is positioned and locked correctly!
32
Only clean the appliance using a damp cloth. Never immerse it in water. Only the coffee jug and the jug lid are dishwasher safe .
33
Clean the grinder channel every 1 to 2 weeks, or whenever you switch between coffee bean containers, to prevent freshly
ground coffee and traces in the grinder channel from mixing together.
Note: Traces left of the previously ground type of coffee beans can affect the taste of your coffee.
Unplug the appliance. Use the special brush to unlock the cover of the grinding channel.
34
Insert a paper filter in the swivel filter. Use the special brush to clean the grinder channel from coffee residue. Caution! Do not
drop the special brush into the grinder channel. The coffee residue can also be removed using a vacuum cleaner. Then wipe the
grinding channel with a dry cloth. Empty the paper filter.
35
Push the cover of the grinding channel back on until it engages. When doing so, press the catch down with a finger. Check
that the cover is correctly positioned. Lock the cover of the grinding channel. The coffee machine is now fully ready for use again.
Always keep the container for the coffee beans closed. Clean the coffee grinder regularly from oily residues from the coffee beans
using a dry cloth .
DECALCIFYING
36
As a precaution we recommend descaling after 70 uses. Use only an environmentally friendly descaling agent and always
follow the manufacturer's instructions.
37
First fill the fresh water container with water and then add the descaling agent. Place the coffee jug with the lid on the
warming plate. Allow the descaling solution to work for approximately 15 minutes, then switch on the appliance. Once the
descaling solution has percolated through, switch the appliance off. If necessary, repeat the descaling procedure. Repeat the
procedure at least twice using clear water.
38
Rinse the coffee jug, jug lid and filter insert thoroughly under running water. Activate the anti-drip valve several times as it
is rinsed.
Enjoy your new AEG product!
www.aeg.com
to close the grinder function. Default setting is open. Once closed, the icon
. Set the desired start time using the Hour
to be prepared. The number of cups is indicated in the display: 2, 4, 6, 8 and 10 cups
.
and Minute button.
to activate the Auto function. When activated, other
GB
DE
ES
FR
GR
NL
PT
9