POWER SUPPLY 1 ALARM RESET / SLEEP Batteries (not included) 1 Open battery door and insert four batteries (preferably PHILIPS POWER LIFE or - stops active alarm for 24 hours alkaline), type R6, UM3 or AA as indicated in the compartment.
Demo mode the correct setting. When the set is first connected to a power supply or has been reset, ‘PHILIPS’ will 3. After both the hours and minutes are set, press SET AL / TIME to confirm the scroll continuously across the demonstration display.
Página 6
REPEAT ALARM USING THE ALARM This will repeat your alarm call at 5 minute intervals. General (see 2) • During the alarm call, press REPEAT ALARM•BRIGHTNESS CONTROL ™ The alarm indicator flashes during repeat alarm. If you wish to use the alarm, first set the alarm time before selecting your choice •...
Página 7
Display error / no reaction to any controls MAINTENANCE – Electrostatic discharge / Electrical interference: set too close to TV, VCR or computer • If you do not intend to use set for a long time, remove the batteries. • Press the RESET hole inside battery compartment of the set with a •...
Página 8
Meet Philips at the Internet http://www.philips.com English Français Español Deutsch Nederlands Italiano AJ 3136 Printed in China...