Bimar Hi-pet PTE1 Folleto De Instrucciones página 13

Fax +32 030 9904733
MAINTENANCE
Important: before performing routine cleaning, remove the plug from the mains and wait
for the device to cool. The clipper set requires careful cleaning after each use.
•
Check the alignment and lubrication of the blades before use. For proper operation of
the device, frequent lubrication of the blades is required (12).
•
The blades must be aligned after each cleaning or replacement.
To align the blades: the space between the ends of the upper
blade teeth and the lower blade teeth should be 0.8 mm, as
shown in the figure.
•
Change the blades when they are no longer sharp.
•
Use the small brush supplied to clean the blades of the clippers.
•
Wash the brush and comb using the small brush supplied using warm water and
household washing up liquid. Then rinse with plenty of water, and dry thoroughly.
•
Do not use abrasive or aggressive products or substances such as petrol or acetone to
clean the device.
•
For long periods of time, you should stow the clippers and its accessories away from
dust and moisture; we recommend using the original case provided.
•
If you decide to no longer use the device, it is recommended that it is made inoperative
by cutting the power cable (first ensure that the appliance has been unplugged from the
power supply), and ensure that any parts that could represent a risk to playing children
are put away (e.g. the combs).
Important information for correct disposal of the product under the European
Directive 2011/65 / EU.
At the end of its lifespan, the product must not be disposed of as part of ordinary waste.
It can be handed in to specific collection points set up by the municipality, or to retailers
who provide such a service.
Separate disposal of an appliance prevents negative consequences to the environment and
health caused by inappropriate disposal. It allows for the materials it is made of to be
recycled so as to save energy and resources. To highlight the fact that appliance should be
disposed of separately, the product bears an icon showing a trash can with a line struck
through it. Incorrect disposal of the product by the user will lead to administrative sanctions
according to current regulations.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
13 36
/
Assembly page 13/36