Tabla de contenido
Publicidad
*
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
Note:
If you intend to connect the Switch to the ground via the PE (Protecting Earth)
cable of AC power cord, please make sure the PE (Protecting Earth) cable in
the electrical outlet is well grounded in advance.
3.4 Power on
The
TL-SF1016/TL-SF1016DS/TL-SF1024/TL-SF1024D/TL-SF1048
16/24/48-port 10/100Mbps Fast Ethernet Switch is powered by an AC Power
Supply. Connect the Switch and power outlet by power cord. Powering on the
Switch, it will be automatically initialized and the LED indicators should
respond as follows:
1)
All of the LED indicators will flash momentarily for one second, which
represents a resetting of the system.
2)
The Power LED indicator will light up.
Figure 3-5
12
Publicidad
Tabla de contenido
