Allen + Roth 1227VA-48-201-900 Manual Del Usuario página 5

INSTALLATION INSTRUCTIONS
2. Apply silicone caulk (not included) to
the top edge of sink (G). With the help of
another adult, lower the sink onto the back
side of the stone top.
Make sure the sink over-flow hole is facing
the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (G).
Note: To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the guide lines marked on the sink and
bottom side of stone top to assist with sink
location.
3. Screw bolts (KK) into the threaded holes of
stone top (D).
Hardware Used
Bolt
KK
2
D
3
x 4
5
G
2
2
S in k L
G
D
KK
1
ip