10. Depending on the size of the child's hand,
you can also adjust the grip width on the
brake lever. You will need a 2 mm Allen
key.
It is important that the brake levers are
actuated several times so that the tension of
Adjusting the saddle height
• After releasing the saddle clamp, the
saddle can be pulled out (observe the
minimum insertion depth!).
Instructions for use
• The saddle height must be adjusted so
that the child's soles reach the ground
even when their legs are slightly bent while
riding.
• Observe the marking of the minimum
insertion depth for the seat post
(min. 65 mm).
Brake (optional)
Equipping the vehicle with a braking system
that is particularly suitable for children only
makes sense for advanced riders. Beginners
and children who are too young are not yet
Maintenance and care
• Regularly check all parts for possible
wear, as well as the screw connections
for proper seating. Self-locking nuts are
stiff and must be replaced after complete
disassembly!
• The valve caps must be tightened firmly
and kept away from children (danger of
swallowing).
• Check the air pressure regularly (the
air pressure to be maintained is on the
10
| Tokee Runner | GB
the brake arms is evenly distributed on both
sides and the adjustment becomes effective.
The contact between the brake pad and bra-
ke disc should occur relatively simultaneously
on both sides.
• Then tighten it again (5-8 Nm).
zu hoch
richtig
zu tief
able to stop such a vehicle independently
using a hand brake. Children riding balance
bikes must always be supervised by adults.
sides of the tyres). Damaged or deformed
components must not be straightened but
replaced.
• Only use environmentally-friendly cleaning
agents, do not use aggressive cleaning
agents under any circumstances. Pro-
tect the vehicle from road salt and avoid
prolonged storage in damp places (e.g.
garage). The balance bike must not be
cleaned with a high-pressure cleaner!
CE marking
The product complies with the European
Directive 2009/48/EC on the safety of toys
and therefore bears the CE marking.
Type plate
The type plate is located in the middle of the
vehicle.
The article number is attached to the saddle
tube of the vehicle and is required for orde-
ring spare parts from your dealer.
GB | Tokee Runner |
11