Bluetooth Connection - EDIFIER TWS NB Manual De Instrucciones

Power On/O
●
• Power on: power on automatically when taken out of the charging
case; or press the multi-function button to power on.
• Power off: power off automatically while placed in the charging case;
or press and hold the multi-function button for approx. 7 seconds to
power off.

Bluetooth Connection

●
• Take the left or right earbud out and press and hold the multi-function
button to enter pairing state, the red and blue lights will flash rapidly;
• Set mobile phone to search and connect to "EDIFIER TWS NB", after
pairing is successful, the indicator light will flash slowly, then take the
other earbud out.
Note: The earbuds will automatically enter pairing state when powered on for
the first time, and will automatically connect to the device connected last time
when powered on again.
Clear pairing records: when the left and right earbuds are being charged in the
charging case, press and hold the multi-function button of either of buds for
5 seconds, and the pairing records have been cleared once the blue light of the
earbud flashes rapdily.
TWS Pairing of the Left and Right Earbuds
●
The left and right earbuds have finished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the steps
below to re-pair:
• When there is no TWS or Bluetooth connections, respectively triple
click the multi-function buttons of the left and right earbuds to enter
TWS pairing state, the blue lights will flash rapidly;
• After pairing is done, the indicator lights of both earbuds will flash
slowly.