Bluetooth Connection - EDIFIER W800BT Manual De Instrucciones

Power ON/OFF
●

Bluetooth Connection

●
1. When powered on and not connected, press and hold the
multi-function button for 2 seconds until the red and blue light ashes
alternately, then the headphones enter pairing state.
2. When powered o , press and hold the multi-function button for
approx. 5 seconds until the red and blue light ashes alternately, then
the headphones enter pairing state;
3. Set your mobile phone to search for and connect to "EDIFIER W800BT",
after pairing is successful, the blue light will ash slowly.
Connect to Two Bluetooth Devices Simultaneously
●
1. Pair the headphones with the rst device;
2. Restart the headphones: press and hold the multi-function button for
5 seconds to enter pairing state and pair with the second device;
3. Operate the rst device to pair with the headphones again, then they
are successfully connected to two devices simultaneously.
Power on: press and hold for 3 seconds
Power o : press and hold for 3 seconds