D Front Panel Position - ubabub Nifty Manual De Instrucciones

D
Front panel position
step 1 Select Front panel, with connecting pins facing the rest of the unit.
step 2 Align connecting pins, support pins and shelves, slowly install front panel checking
that all of the pins, support pins and shelves are connecting properly.
step 3 Once the front panel is tightly fit against all of the rails.
step 4
Insert locking Cams on both rails.
step 5
Align the locking Cams and connecting pins. Insert the connecting pins to the
rails. Make sure connecting pins are passing through the locking Cams. Insert the
locking Cam nuts.
step 6 Use screwdriver to turn locking Cam nuts clockwise until tight.
step 7 Repeat for all six, cam lock points as per diagram.
10
5.1
Insert the
connecting pins
to the rails.
5.3
Use screwdriver to turn locking
Cam nuts clockwise until tight.
5.2
Insert the
locking Cam
nut.
x 6