AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle's hood to remove any debris and/or dirt.
• Dry the hood with a clean towel.
Installation Steps
Open Hood. Locate (4) circular holes on the underside
of hood. Clean the area around these with a soft cloth.
1
Installation Instructions
®
- Bugflector II
NOTE: Actual application may vary slightly from illustrations.
® ®
- Carflector - Chrome Hood Shield
Screw x4
Clean Towel
Attach fasteners to hoodshield by inserting screw
through hood shield, and into well nut. Partially
Well nut
Hood shield
2
Page 1 of 2
I - Sheet Number BF62 Rev.C
Well Nut x4 Bump On x4
Phillips head screwdriver
thread screw into well nut.
™