AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
NOTE: Steps 1 - 3 Tundra ONLY
Locate the plastic applique on the grill.
1
Installation Instructions
®
- Bugflector II
Clean Towel
NOTE: Actual application may vary slightly from illustrations.
applique
® ®
- Carflector - Chrome Hood Shield
Fastener x2
Phillips screw-
driver
Using the Pry Tool provided, carefully pry the plastic ap-
plique away from the grill. Begin by lifting up the bottom
drivers side corner and work your way across to the
bottom passenger side corner. Remove applique.
grill
2
Page 1 of 4
I - Sheet Number BF70 Rev.B
Bump On x4 Pry Tool x1
(Tundra ONLY)
10mm Nut
Driver
applique
™