Technical Specifications - Novus J-155 Manual Del Usuario

1
1.5

Technical specifications

• Mains voltage/frequency:
230V / 50Hz
• Mains power fuse protection:
10 A medium time-lag min.;
16 A medium time-lag max.
• Power cord:
Cable 3.5 m long, 2-core (2 x 1 mm
CEE 7/17 plug, power socket type EF
• Extension lead:
max. 10 m with core cross-section of 1.5 mm
• Pulse repetition rate:
max. of 20 shots/min
J-155 A single stroke S2 30 min
J-155 A multiple stroke S2 4 min
• Electrical pulse generator:
radio-interference-suppressed
• Temperature range:
-10°C to 40°C
• Dimensions:
198 mm high, 226 mm long, 58 mm wide
• Weight:
1770 g
• Noise emission:
measured in accordance with EN 60745-1
A-weighted sound pressure level
L = 90 dB(A); uncertainty K
pA
A-weighted sound power level
L = 101 dB(A); uncertainty K
WA
Wear ear protection!
We reserve the right to make technical modifications and improvements in the interest of advancing our products.
12 / 96
• Vibration:
• The total vibration value stated and the noise
2
)
• The total vibration value stated and the noise
2
Warning:
• While actually using the power tool, vibration
• To protect the operator, define additional safe-
2.5 dB(A)
pA =
2.5 dB(A)
wa =
Total vibration value measured
in accordance with EN 60745-1
Vibration emission value ah = 9.4 m/s
uncertainty K = 1.5 m/s
emission level stated were measured on the
basis of a standardised testing method and
can be used for comparing one power tool with
another.
emission level stated can also be used for mak-
ing a preliminary estimate of load.
and noise emissions may vary from the values
stated. This will depend on the way in which
the power tool is used, in particular the type of
workpiece it is being used for.
ty measures based on an estimate of vibra-
tion load under actual operating conditions
(taking into account all parts of the operating
cycle, such as cycles in which the power tool is
switched off, and cycles in which it is switched
on but not operating under load).
2
;
2