Getting started
Remove the back cover by nail or plec-
trum. Do not bend or twist the back
cover excessively. Doing so may damage the cover. Be careful not
to damage your fingernails when you remove the back cover. If
the battery is in the phone, lift it out.
Follow the signs for SIM1 and SIM2 on
the phone to install SIM1 and SIM2
cards. Only miniSIM cards work with this
device! Using SIM cards reductions is
not recommended. Make sure that the
golden contacts of the card face into the
phone and the notched corner has the
same direction with the card slot.
Insert a memory card (max. 16 GB) with
the gold-coloured contacts facing down-
wards and lock it by metal holder.
Insert the battery with its
golden contact part facing the
set phone battery contact
piece, and then insert the
battery cover.
Charging
Use included charger or you may use any micro USB compatible
charger. When you want to charge battery, connect charger with
phone by bottom charging connector (7) or plug cable to desk
stand and place phone to the stand.
EN
1