Alarm Codes - Piron Marco Polo Serie Instrucciones

ALARM CODES:

In the event of an alarm the error code will be displayed on the oven's operating display and a buzzer will
sound for a maximum of 1 minute. Unlike errors, alarms do not prevent the oven from operating and do not
cause the immediate loss of any recipe programmed. Every alarm has a consequence, but is generally
limited to abandoning the operation that had been attempted.
A cooking program has been selected but the plug has not
been inserted into the relevant socket.
Er10
Or the plug has been removed during a cooking program.
A program was selected that involves use of the core
Er11
probe but the probe has not been connected to the oven.
A WASHING PROGRAM OR DETERGENT/RINSE AID
PRE-LOADING PROGRAM HAS BEEN INTERRUPTED
Er14
DUE TO SUDDEN INTERRUPTION OF THE ELECTRIC
POWER SUPPLY.
Er20 DOOR OPEN. The process in progress was interrupted.
Er25 TRAY RACK TROLLEY ABSENT
E n g l i s h
Insert the jack PLUG into the relevant
socket.
Alternatively, connect the core probe
without setting a temperature value for it.
PRESS THE ENTER KEY.
Insert the CORE PROBE connector into
the relevant socket.
PRESS THE ENTER KEY.
PERFORM THE WASHING CYCLE
PROPOSED BY THE ELECTRONIC
SYSTEM OR SELECT THE RINSE
CYCLE.
CLOSE THE OVEN DOOR.
INSERT TRAY RACK TROLLEY INTO
COOKING CHAMBER
| 57