Levelling The Refrigerator; Starting The Refrigerator - Qilive Q.6756 Manual De Instrucciones

4.2. INSTALLATION
EN
Precautions before installation:
The information in this Instruction Manual is for reference only. The physical product
may differ from the description provided herein.
Take precautions to ensure that while handling the refrigerator that you avoid personal
injury.
■ Warning! Keep away from heat and avoid direct sunlight.
Important! To prevent rusting or reduction of the insulation properties of the
■
refrigerator, do not place the refrigerator in moist or watery areas.
Important! Do not spray or wash the refrigerator. Do not put the refrigerator in
■
moist places where it is easily splashed with water as this will affect the electrical
insulation properties of the refrigerator.
1. Place the refrigerator in a well-ventilated, indoor location. Ensure the refrigerator
is on a level and sturdy location. The refrigerator can be levelled somewhat using
the adjustable feet.
2. Ensure the space above the refrigerator is more than 30 cm and that the
refrigerator is placed against a wall with a distance of at least 10 cm to facilitate
heat dissipation.

4.3. LEVELLING THE REFRIGERATOR

1. Turn the adjustable feet clockwise to raise one side of the refrigerator
(see Figure 1).
2. Turn the adjustable feet counter-clockwise to lower one side of the refrigerator.
3. Adjust the left and right feet, as described above, to achieve a horizontal level.
4.4. CHANGE THE DOOR FROM RIGHT TO LEFT OPENING
Tools required:
■ Philips screwdriver
■ Putty knife, thin bladed screwdriver
■ 5/16" socket and ratchet
■ Masking tape
1. Power off and unplug the refrigerator. Remove any objects from the door trays.
2. Attach the door to the cabinet using masking tape (see Figure 2).
3. Unscrew and remove the top cover (see Figure 3).
4. Unscrew and remove the upper hinge (see Figure 4).
5. Remove the door. Unscrew and remove the bottom hinge and levelling feet
(see Figure 4).
6. Fix the levelling feet and bottom hinge on the opposite side.
7. Assemble the door stopper and axle sleeve in the opposite direction
(see Figure 5).
8. Place the door on the bottom hinge, vertically. Fix the upper hinge and attach the
top cover of the refrigerator (see Figure 6).

4.5. STARTING THE REFRIGERATOR

■ Before the initial use, keep the refrigerator still and upright for half an hour before
connecting it to a power supply (see Figure 7).
■ Before putting any fresh or frozen foods into the appliance, run the refrigerator for
at least 2-3 hours, or at least 4 hours in the summer months when the ambient
temperature is high.
■ Spare enough space for convenient opening of the doors and drawers
(see Figure 8).
12