AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle's hood to remove any debris and/or dirt.
• Dry the hood with a clean towel.
Installation Steps
1
Installation Instructions
®
- Bugflector II
Clean Towel
NOTE: Actual application may vary slightly from illustrations.
Raise hood.
® ®
- Carflector - Chrome Hood Shield
Screw x4 Washer x4
Phillips screw-
driver
Test fit hood shield in place. Note where hood shield flanges align
with the factory installed weatherstrip in (8) locations. Mark all
locations with a grease pencil. Remove hood shield.
2
Page 1 of 3
I - Sheet Number BF125 Rev.A
Hood shield Fastener
Insert x4 Assembly
x4
Grease pencil
™
Bump On x4
Tape