Tripp-Lite WorkWise WWSS1332W El Manual Del Propietario página 6

Assembly
7
Slide VESA plate and Display onto the Support Mast.
Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate.
Slide the VESA plate over the Support Mast bracket. Reattach the top knob to secure the VESA
mount (removed in step 3).
8
Adjust Bracket Arm tension.
Keep the bracket arm level during tension adjustment. You may need to slightly loosen or
tighten the adjustment screw using the provided 6 mm Hex Key, depending on the weight of
display installed.
If display settles on its own, rotate adjustment screw towards the "+" symbol.
If display rises on its own, rotate adjustment screw towards the "-" symbol.
17-09-137-93377A.indb 6
P
6
P
10/25/2017 3:05:50 PM