Connecting Diagram - Ibanez Jemini distortion Manual Del Propietário

1. INTRODUCTION
JEMINI is produced by joint development with Steve Vai and is equipped with two independent distortion circuits, which
make it possible to output flexible sound corresponding to every music genre.
The design of two distortions does not harm the large frequency components which the guitar originally has, and can be
also used for other wide application, such as a booster, overdrive, or distortion.
2. CAUTION
• The power supply will be switched on when the plug is inserted into the input (IN) jack. Remove the plug from the input
(IN) jack when not using the unit to prolong the battery life.
• Don't use this product where it might become wet, or in locations of high humidity. Also avoid excessively dusty
locations or locations of high temperature. Failure to observe this warning may cause malfunctions or fire.
• When the LED indicator dims, the sound quality will drop remarkably. Replace the battery immediately.
• When not using the unit for a long time, remove the battery to avoid damage from battery leakage.
• When using an AC adapter, use only the IBANEZ AC109, AC309 or AC509 adapter to prevent damage.
• Don't remove the screws on the bottom.

3. CONNECTING DIAGRAM

GUITAR AMP
AC ADAPTER
GUITAR
- 3 -
Either switch off the amplifier or reduce its
volume to the minimum level when making
connections to prevent hearing loss and
possible amplifier or speaker damage.