Ibanez Jemini distortion Manual Del Propietário página 5

4. BATTERY REPLACEMENT
1
3
2
1
5. DESCRIPTIONS
1 2 3 4
7 6
1 Press the button to open the pedal.
2 Release the battery snap and replace the battery.
3 Close the pedal. The input jack is used as the power supply switch when running on batteries. The
power supply will be switched on when the plug is inserted into the input jack.
DRIVE
Controls the saturation level. The saturation and sustain effects will increase
when the knob is turned to the right.
1 2 3
TONE
The high-end is increased when turned to the right and reduced when turned
to the left.
LEVEL
Controls the overall volume when the effect is on. Volume is increased when
turned to the right and decreased when turned to the left.
LED switch
Switches the brightness of LED.
5 - BRIGHT: The LED illuminates brighter when it's difficult to see, such as
- SAVE : Suppresses the exhaustion of the battery. Consumes up to
LED Indicator
When the effect is on, the LED indicator light will be illuminated.
Foot Switch
Turns the effect ON and OFF. When one effect is turned ON, the other effect
is turned OFF, so you can switch two effects by one action. Both cannot be
8
turned ON simultaneously.
Spare battery case
A spare battery can be stored under the left pedal.
Battery case
The bottom of the right pedal serves as a battery case.
on outdoor stages in the daytime.
The exhaustion of the battery is faster. Consumes up to 49mA
current (when the red light is ON).
23mA current (when the red light is ON).
- 4 -