To Select the Source (depending on the model)
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
To Edit the Input Source Name (depending on the model)
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER
2. Press the ENTER
Press the
or
buttons to select signal source, then press the ENTER
When you connect equipment to the LCD, you can choose between the following sets of
jacks: AV1, Component1, Component2, PC or HDMI on the TV's rear panel and AV2,
S-Video on the TV's side panel.
HDMI input can only be selected when the external device is turned on and
connected via HDMI.
26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
You can enter TV or PC mode directly by using the TV or PC button on the remote control.
1. Press the MENU button to display the menu.
Press the ENTER
Press the
or
buttons to select "Edit Name", then press the ENTER
2. Press the
or
buttons to select "AV1", "AV2", "S-Video", "Component1",
"Component2", "PC" or "HDMI" input jack, then press the ENTER
26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.
3. Press the
or
buttons to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "AV Receiver", "DVD Receiver", "Game",
"Camcorder", "DVD Combo", "DHR" or "PC" input source,
then press the ENTER
Press the EXIT button to exit.
English-17
button to select "Input".
button to select "Source List".
button to select "Input".
button.
button.
button.
button.