Operation
Turning the TV On and Off
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
Press the POWER
button on the remote control.
You can also use the
button on the front of the panel.
1. Press the POWER
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
ENTER
button to confirm your choice.
3. The message "Check antenna input." is displayed with "OK" selected. Press the
ENTER
button.
4. Press the
or
buttons to select "Air", "STD", "HRC", or "IRC", then press
the ENTER
button.
5. Press the ENTER
all of the available channels.
To stop the search before it has finished, press the ENTER
selected.
6. Press the ENTER
"Hour", "Minute" or "am/pm". Set the "Hour", "Minute" or "am/pm" by pressing the
or
buttons. Press the ENTER
(Refer to "Setting the Clock"on page 32.)
You can set the Hour and Minute directly by pressing the number buttons on the
remote control.
7. The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER
English-13
button on the remote control.
button to select "Start". The TV will begin memorizing
button. Press the
or
button.
button.
or
buttons. Press the
button with "Stop"
buttons to move to the