Uline BIG JOE H-4709 Manual Del Usuario página 6

WARNING! This truck is equipped with a battery.
Read and heed the warning decal located near
the battery.
WARNING! Do not plug into electrical outlet
before connecting the battery to the charger.
Failure to do so could result in serious injury to
operator and product.
STEPS MUST BE FOLLOWED IN ORDER:
1. Turn key to OFF position. (See Figure 10)
2. Confirm unit is NOT plugged into electrical outlet.
3. Disconnect red battery cable from motor.
(See Figure 11)
4. Connect red battery cable to charger.
(See Figure 12)
Battery
Cable
PAGE 6 OF 18
CHARGING THE BATTERY FOR H-4710
Battery
Cable
Motor
Charger
5. Plug truck into electrical outlet to charge.
(See Figure 13)
Figure 10
6. Once charged, unplug truck from electrical outlet.
7. Remove red battery cable from charger
(See Figure 14).
Figure 11
8. Reconnect battery cable to motor. (See Figure 15)
Figure 12
9. Truck is ready for use.
1-800-295-5510
uline.com
Battery
Cable
Charger
Figure 13
Plug
Figure 14
Figure 15
Battery
Cable
Motor
0821 IH-4709