Checking The Package Contents; Turning The D Fine+ 2 On; Pairing - Dockin D FINE+ 2 Manual Del Usuario

CHECKING THE PACKAGE CONTENTS

Make sure that the package contents are complete and that all
parts are undamaged before you commission the D FINE+ 2.
1. Take the D FINE+ 2 and all accessories out of the packaging.
2. Use the following list to check whether the package contents
are complete.
The package contents contain the following individual parts:
• D FINE+ 2 speaker
• Power cable with wall adapter
• AUX cable (3.5 mm plug cable)
• Carry strap
• User manual
3. Check whether the D FINE+ 2 or the accessories are damaged.
If this is the case, do not use the D FINE+ 2. Instead, contact the
manufacturer at the service address.
12
TURNING THE D FINE+ 2 ON
• Hold the button on the top of your D FINE+ 2 down for 3
seconds to switch the D FINE+ 2 on.
The D FINE+ 2 automatically connects with the last Bluetooth®
source (blue LED illuminates continuously) or switches to pairing
mode if the last source is not available (blue LED blinks quickly).
A short press of the
button will show the current charging sta-
tus via the battery LED for 15 seconds without turning the unit on.

PAIRING

Connecting via Bluetooth® function:
1. Activate Bluetooth® on the source device (Bluetooth® settings).
2. Go to the Bluetooth® settings and scan for discoverable devices.
3. Select "DOCKIN D FINE+ 2" from the Bluetooth® device list.
After successful pairing, the blue LED on your D FINE+ 2 stays lit and
you will hear a confirmation sound.
Connecting via NFC function:
This function is only available if your device supports NFC ( Near Field
Communication ).
1. Activate Bluetooth® on the source device (Bluetooth® settings).
2. Activate NFC on the source device.
3. Hold your source device close to the NFC logo on top of the
D FINE+ 2. First time connection via NFC needs to be confirmed
on your source device.
After successful NFC pairing, the blue LED on the D FINE+ 2 stays lit
and you will hear a confirmation sound.
13