Chapter 1 : Introduction; General Information - Black Box AC211A Manual Del Usuario

Chapter 1 : INTRODUCTION

Chapter 1 : INTRODUCTION
1-1. SUPPLIED EQUIPMENT
• 1 VIDEO to VGA converter (AC211A).
• 1 Power Supply (25W).
• 1 AC Main cable.
• 1 VGA Male / Female HD15 Cable.
• 1 Y/C (S-VHS) Video Cable.
• 1 RCA / RCA Cable (CINCH).
• 1 SCART / RCA + JACK (Video Out) Cable.
• 1 BNC(x4) / DB9 Cable.
• 1 user's manual.

1-2. GENERAL INFORMATION

The "VIDEO to VGA converter" converts all NTSC/PAL/SECAM, S.VIDEO (Y/C) or RGB/S composite Video signals
into VGA 640 x480.
Automatic Detection of Composite Video standards, the integrated Time Base corrector and Line Doubling functions
provide a very good picture resolution, higher brightness and the most effective visual comfort.
The automatic or manual TV/Computer priority detection switch, Stereo Audio connection and user controls make the
VIDEO to VGA converter a very friendly device to use in most of the configurations. You also have the option of selecting
on your display device either the Line doubled video or your current computer.
The VIDEO to VGA converter is particularly suited for LCD projectors, Video display on VGA computer monitors,
Multisync. monitors, LCD panels, data projectors.
Boosted outputs allow a long VGA distance (up to 150 m - 500ft).
PAGE 4
VIDEO to VGA converter
VIDEO to VGA converter