Symbols Used - SICK LCU-X Manual De Instrucciones

Operating instructions
LCU-X
Note
Explanation
Recommendation
WARNING
66
About this Document
1.3 Level of information
These operating instructions contain information on how to
install, place in operation and operate the device. Official and
legal regulations are always to be observed; it is not possible
here to also provide comprehensive information on these basic
requirements. In Germany, the trade association directives (ZH
1/597) in particular are to be observed.
Further information on health and safety and opto-electronic
protection equipment can be obtained directly from your local
SICK office, e.g. Safe Machines (SICK notes on the usage of
opto-electronic protection equipment).
1.4

Symbols used

Some information in these operating instructions is especially
marked to provide you with a quick reference.
A note provides information on special features of the device.
An explanation communicates basic knowledge.
A recommendation assists in taking the best action.
Warning !
Always read warnings carefully and heed them conscientiously.
The device can only fulfil its safety-relevant task if it is
correctly used, that is "safely" – i.e. fail-safe – fitted and
connected.
8 007 936/N079/17-12-02 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
Chapter 1