DJI THUMBWHEEL Guia Del Usuario página 7

3. Remove the step-down adapter if mounting the Thumbwheel on the handle
bar of a Ronin.
Connection
Method I: For controlling the camera lens through the DJI Focus Motor and a
Ronin series gimbal.
Connect the Communication Port on the Thumbwheel to the CAN 2 Port on the
Ronin-MX or the CAN Port on Ronin/Ronin-M using the provided CAN Bus cable.
Method II: For controlling the camera lens through the DJI Focus Motor.
Connect the communication ports on the Thumbwheel and the DJI Focus motor
using the dedicated Thumbwheel-DJI Focus Motor Cable (not included), then
connect the P-TAP port of the cable to a DC power supply (6V-12V) to power the
motor.
CAN Bus Cable for Ronin-MX
OR
CAN Bus Cable for
Ronin/Ronin-M
©
2017 DJI All Rights Reserved.
5