DJI THUMBWHEEL Guia Del Usuario página 6

Installation
The following instructions provide step by step directions on how to mount the
Thumbwheel on a Ronin series gimbal.
1. It is recommended to use the cable clamp to secure the cable.
Remove the screws on the back of the Thumbwheel. After plugging in the
cable, use the provided cable clamp screws to secure the cable clamp.
• Choose the correct cable before mounting the cable clamp.
• Use the provided cable clamp screws to secure the cable clamp. DO
NOT use any other type of screw.
2. Loosen the lock knob, then attach the Thumbwheel to the handle bar of the
Ronin-M/Ronin-MX and tighten the lock knob.
©
2017 DJI All Rights Reserved.
4