Urmet AIKO SLAVE Manual Del Usuario página 9

To remove a slave video door phone from the system, disconnect the cables from the upstream
video door phone. The drawing below shows how to disconnect slave video door phone No. 2
from the system.
video door phone
POW
LINE TERMINAL
Jumper JP1 is present on the video door phone, on the right of the terminal board, and allows to insert the
line terminal. The line terminal must be activated on the video door phone connected to the end of a line
which is not resumed with another segment from the same terminal (LINE).
The position of jumper JP2 must not be varied.
VIDEO DOOR PHONE CODE
Set the respective address using the dip switches on each apartment station to install "slave" video door
phones.
Address
"Master"
video door
prhone
"Slave" video
door phone
nr. 
DS17-07
master
LINE Z K
Terminal not inserted
Terminal insert (default)
Dip switch position
ON
1 2
ON
1 2
slave video door
phone nr. 1
POW LINE Z K
LINE
Address
"Slave" video
door phone
nr. 1
"Slave" video
door phone
nr. 3
slave video door
phone nr. 2
POW LINE Z
JP1
Dip switch position
ON
1 2
ON
1 2
K