Noise And Vibration Data; Noise And Vibration Declaration Statement - Chicago Pneumatic SAW 14 Instrucciones De Seguridad Y Funcionamiento

SAW 14, 16, Cart

Noise and vibration data

Type
SAW 14 (Ø405 mm, 20 lpm)
SAW 14 (Ø405 mm, 30 lpm)
SAW 16 (Ø405 mm, 20 lpm)
SAW 16 (Ø405 mm, 30 lpm)
SAW 16 (Ø405 mm, 40 lpm)

Noise and vibration declaration statement

Guaranteed sound power level Lw according to ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to ISO 11203.
Vibration value A and uncertainty B determined according to ISO 20643. See table "Noise and vibration data"
for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the
machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at
http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
3392 5186 90a | Original instructions
Noise
Sound pressure Sound power
Declared values
ISO 11203 2000/14/EC
Lp
r=1m dB(A) rel guaranteed dB(A)
20µPa
86
86
102
102
102
Safety and operating instructions
Three axes values
Declared values
Lw
A
2
m/s value
rel 1pW
99 4.90
99 5.00
115 4.90
115 5.00
115 8.30
Vibration
ISO 20643
B
2
m/s spreads
1.00
1.10
1.00
1.10
2.00
19