Chicago Pneumatic SAW 14 Instrucciones De Seguridad Y Funcionamiento página 9

SAW 14, 16, Cart
WARNING Slipping, tripping and
falling hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
► Always make sure that no hose or other object is
in your way or in any other person's way.
Always make sure you are in a stable position with
►
your feet as far apart as your shoulders width and
keeping a balanced body weight.
WARNING Motion hazards
When using the machine to perform work-related
activities, you may experience discomfort in the
hands, arms, shoulders, neck, or other parts of the
body.
Adopt a comfortable posture whilst maintaining
►
secure footing and avoiding awkward
off-balanced postures.
Changing posture during extended tasks may
►
help avoid discomfort and fatigue.
In case of persistent or recurring symptoms,
►
consult a qualified health professional.
WARNING Material hazard
During operating, the material that you operate in
can become hot and fall down, which can cause a
fire or even an explosion. This can lead to personal
injury or death.
Always consider the direction of the falling object.
►
Wear fire resistant clothing and have a bucket of
►
water nearby.
WARNING Trapping hazard
There is risk of neck ware, hair, gloves and clothes
getting dragged into or caught by a rotating
insertion tool or accessories. This may cause choking,
scalping, lacerations or death. To reduce the risk:
Never grab or touch a rotating blade.
►
► Avoid wearing clothing, neck ware or gloves that
may get caught.
Cover long hair with a hair net.
►
3392 5186 90a | Original instructions
Safety and operating instructions
WARNING Grinding hazard
Using the side of the cutting blade can cause that
the blade jam or break. Pressure from the side can
damage the cutting blade. This can result in personal
injury. To reduce risk:
Never grind by using the side of the cutting blade.
►
Never use the cutting blade if it has been
►
damaged.
Never grind over the maximum peripheral speed.
►
Always feed the machine down in line with the
►
cutting blade.
Only use the cutting section.
►
Never pull the machine to one side.
►
9