Handle and nozzle
1
Remove the nozzle from the handle. Rinse the nozzle after each use
(Fig. 14).
2
Open the reservoir and rinse it under the tap to eliminate residue
(Fig. 15).
Tip: You can also use a cotton bud to wipe the reservoir.
Note: Do not immerse the handle in water.
3
Wipe the entire surface of the handle with a damp cloth (Fig. 16).
Charger
1
Unplug the charger before you clean it (Fig. 17).
2
Wipe the surface of the charger with a damp cloth (Fig. 18).
Storage
If you are not going to use the AirFloss for an extended period of time,
follow the steps below.
1
Open the cover of the reservoir and empty the reservoir.
2
Press the activation button until no more spray comes out of
the nozzle.
3
Unplug the charger (Fig. 17).
4
Clean the AirFloss nozzle, handle and charger.
5
Store the AirFloss in a cool, dry place away from direct sunlight.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/
service or go to your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the worldwide guarantee
35_020_6285_2_DFU-Simple_A6_v1.indd 11
ENGLISH
11
05/03/15 13:40