Preparing For Use - Philips Sonicare AirFloss HX8221/02 Manual De Instrucciones

Charging
1 Put the plug of the charger in the wall socket (Fig. 2).
2 Place the handle on the charger (Fig. 3).
,
is charging (Fig. 4).
Note: When it is fully charged, the AirFloss has an operating time of up to
2 weeks (or 14 uses).
to be recharged (fewer than 3 uses left).

Preparing for use

1 Align the nozzle so the tip faces the front of the handle and press
the nozzle down onto the handle ('click') (Fig. 5).
Note: Replace the nozzle every 6 months for optimal results. Also replace
the nozzle if it becomes loose or no longer clicks onto the handle.
2 Open the cover of the reservoir ('click') (Fig. 6).
3 Fill the reservoir with mouthwash or water (Fig. 7).
Note: To operate effectively, the AirFloss has to contain either mouthwash
or water.
Tip: For a fresher experience, use mouthwash instead of water.
Note: Do not use mouthwash that contains isopropyl myristate
(e.g. Dentyl Active) or high concentrations of essentials oils, as it may damage
the appliance. This includes all mouthwash sold in glass and ceramic packaging.
4 Close the cover of the reservoir ('click') (Fig. 8).
5 Press the on/off button (Fig. 9).
The green charge indicator lights up.
,
6 Press and hold the activation button until spray comes out of the
tip of the nozzle (Fig. 10).
35_020_6285_2_DFU-Simple_A6_v1.indd 9
ENGLISH
9
05/03/15 13:40