Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
light fixture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range
Sensing angle
Electrical load - integrated LED
Lumens
Power requirements
Operating modes
Time delay
TOOLS REQUIRED
Phillips
screwdriver
Wire strippers/
cutters
Electrical tape
Safety goggles
Up to 40 ft. (12.2 m) (Varies with surrounding temperature)
Up to 180°
14 Watts
1000
120 VAC, 60 Hz
Motion activated (night only), Manual (night only)
5 minutes (non-adjustable)
Flathead
screwdriver
Circuit tester
Silicone sealant
Drill
3
Please contact 1-866-308-3976 for further assistance.
Pliers
Work gloves
Ladder
3/16" (5 mm)
Drill bit
HOMEDEPOT.COM
Publicidad
Capítulos
Tabla de contenido
