Overview; Design And Function; Main Parts; Labels - Chicago Pneumatic CP 0315 Instrucciones De Seguridad Y Funcionamiento

CP 0315

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

CP 0315 Core Drill is a pneumatic drill for core
cutting with diamond core bits or ordinary drilling
in wood or metal.
It is a powerful, hand-held rotary drill without
percussion. The rotational speed is 750 rpm,
non-reversible. It is suitable for core drilling from 2"
to 6" diameter (typically 3" to 5" diameter).
Typical core drilling depth: 1 ft. (300 mm) but can
be deeper.
It is also suitable for ordinary drilling applications, -
for example drilling 25 to 30 mm diameter holes in
timber or metal, using number 2 Morse taper.
The machine can be used both horizontally and
vertically. No other use is permitted.

Main parts

A
B
C
D
Air inlet
A.
Throttle handle
B.
C. Vent nipple
D. Breast plate
Gear box
E.
Vent nipple
F.
9800 0554 90b | Original instructions
G. Spindle
Motor
H.
Handle
I.

Labels

The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
Data plate
A
B
A. Machine type
B. Maximum permitted compressed air pressure
Serial number
C.
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
The CE symbol means that the machine is
E.
EC-approved. See the EC declaration which is
E
delivered with the machine for more
information. If the CE symbol is missing, it
F
means that the machine is not EC-approved.
Safety label
G
H
I
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.
Safety and operating instructions
C
D E
11