Steren WR-058 Manual De Instrucciones página 17

5. Extend the receiver's antennas and place
it in a position where they can receive the
signal from the microphones.
CH B
CH A RF AF
RF AF
VOLUME
POWER VOLUME
6. Turn on the receiver and the transmitters;
CH A
RF
the LEDs will light up on the receiver.
POWER VOLU
7. Adjust the microphone's volume on the
receiver.
VOLUM
Before turning on the device, make sure the microphone volume is at the minimum
level. Loud sounds can cause damages in the microphones or ears.