Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Features Overview
9
9
10
10
11
11
31
30
22
21
1.
Power Input: If you do not want to use a computer in your setup (i.e., if you are using
Trigger Finger Pro to control an external MIDI module), connect this input to a power
outlet using an optional power adapter (6V DC, 1A, center-positive, sold separately). You
do not need this connection when using Trigger Finger Pro with a computer; it will be
powered by the USB bus.
2.
Power Switch: Press this button to power Trigger Finger Pro on or off.
3.
USB Port: Use a standard USB cable to connect this USB port to your computer. The
computer's USB port provides ample power to Trigger Finger Pro. This connection is also
used to send and receive MIDI data to and from your computer.
4.
MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of
an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).
5.
Display: Use this LCD to view Trigger Finger Pro's menus, options, parameters, and
settings.
6.
Value Dial (Push to Enter): Use this dial to change the Preset, parameter values, settings,
etc. Pressing the dial also functions as an Enter button.
7.
Function Buttons: Press these buttons to execute the command shown right above it in
the display.
5
9
9
14
10
10
15
16
11
11
26
23
24
25
27
28 29
20
18
17
22
21
4
7
7
7
12
19
22
21
7
3
1
2
6
7
8
13
22
21
Publicidad
Tabla de contenido
